C10 Multi-surface Fungicidal Wash
Wethertex C10 Multi Surface Fungicidal Wash is a ready to use, water based masonry wash for the removal of a broad range of bacterial, algal and fungal growth on masonry surfaces prior to painting. Developed using fast acting Bioactive Tec-nology, the product is particularly effective against algae and mould growth and creates a clean surface, ready for painting.
Pack Size: 5L Coverage: Approx. 3.2m² per litre dependant on substrate
Fast Acting
Algae Resistant
Bio Stop
Ready to Use
ST1 Quick Dry Stabilising Primer
Wethertex ST1 Quick Dry Stabilising Primer is the ideal product for use when preparing unstable exterior surfaces for painting. Specially developed using fine particle sized polymers, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability. The quick drying nature of the product allows Wethertex masonry paints to be applied with minimum delay.
Pack Size: 5L Coverage: Approx. 5m² per litre dependant on substrate
Silicone Water Repellent
Water Based
High Adhesion
Breathable
WB1 WeatherBLOCKER!
Wethertex WeatherBLOCKER is the perfect one stop solution for protecting your building from the damaging effects of penetrating damp. Developed using nano-technology, this clear, waterproof coating penetrates deep into brick or stone to give up to 25 years protection against damp without affecting the appearance of the substrate. Due to the deep penetration into the substrate, WeatherBLOCKER is resistant to UV degradation and will retain its performance for many years.
Pack Size: 5L Coverage: Approximately 5-10m² per litre dependent on substrate
Nano Technology
Water Repellent
Ultra Waterproofing
Ready to Use
